基于火箭橇的北斗动态定位精度鉴定方法

介绍了几种现有的以GPS/北斗为主要代表的卫星导航系统的动态定位精度 鉴定方法,分析了这几种方法在模拟实际使用环境、鉴定精度等方面的优缺点,提出了 一种基于火箭橇试验平台的北斗导航定位系统动态定位精度鉴定方法。该方法能够很好 地模拟北斗导航定位系统实际工作环境（速度、加速度、振动和天线角度等）,解决高 动态、高精度北斗导航定位系统动态定位精度鉴定问题,并对该方法的原理和实施方法 作了详细的论述,最后分析了该方法的不确定度及误差,并提出了改进措施。     

基于北斗接收机的车载卫星导航系统的设计

基于北斗卫星导航系统、北斗地基增强系统、移动通信网络,设计开发了 一款小体积、高精度车载导航系统。主要在接收基站差分信息以及实现高精度定位方面 进行探索。通过单点定位和差分定位的野外跑车对比试验得出,该系统性能稳定、可靠 性高,其差分定位精度能够满足车辆导航的要求。     

基于经验模分解的PPP时间比对数据消噪方法

精密单点定位(PPP)时间比对数据会受到观测噪声的影响，因此对时间比对数据进行消噪是一项重要工作。提出一种基于经验模分解(EMD)的PPP时间比对数据消噪方法，并将该方法与Vondrak滤波方法的消噪效果进行对比。结果表明，两种方法的消噪效果相当，均能有效滤除PPP时间比对数据中的随机噪声，明显改善时间比对的稳定度。     

差分卫星定位技术及其在武器系统中的应用

差分卫星定位系统可以极大地提高卫星定位的精度,但也有使用、维护复杂等缺点。针对差分卫星定位的特性,首先阐述了卫星差分定位的基本原理,分析了卫星定位误差源,并介绍了差分定位系统对各种误差的修正情况,然后介绍了差分定位系统的分类、方法及发展,其中详细介绍了在武器系统领域中应用较广的局域差分系统的各种方法及其优缺点;最后,对差分系统的实际应用进行了阐述,并重点探讨了其在进攻性武器及防御性武器领域实现应用的可行性。     

复合材料J型加筋壁板制造技术研究

对J型加筋壁板共胶接技术在实际应用中所存在的主要问题进行了研究,着重介绍了R区芯材精确填充、筋条外型模成型、框架式插销垂直定位、共胶接真空袋封装等关键技术的研究情况,并对相关技术的应用进行了深入分析。研究结果表明,在精确计算的基础上,设计制造专用成型模具可实现R区填充芯材的精确制备,有利于提高加筋壁板胶接质量;选用筋条外型模成型工艺,并设计采用框架式插销垂直定位装置,可有效解决J型筋的表面成型质量、筋条尺寸精度、位置精度等问题;使用已硫化橡胶作为维形挡条、制备合适的内型面软模、优化辅助材料铺放方法,可减少表面质量问题,降低架桥、破袋风险。在应用了上述一系列制造技术后,成功制造了满足使用要求的J型加筋壁板复材零件,并初步实现该类型零件的批量化生产。     

机载无源侦察定位方法研究

无源侦察定位是电子对抗的重要组成部分,在隐身与反隐身、电子侦察等方面的作用日益突出.介绍了飞机侦察定位所采用的测向方法,并对两种常用的测向方法进行了精度分析,给出了装备飞机的应用建议.     

基于多Agent的机群编队导航系统设计与研究

智能化建模在装备作战仿真领域中独居优势.将多Agent技术程序设计方法引入机群编队导航系统的设计中,对模型进行了顶层设计并分析了Agent子系统之间的信息交互过程,为机群编队导航系统的研发和设计提供了新的思路.     

A null frame for spacetime positioning by means of pulsating sources

We introduce an operational approach to the use of pulsating sources, located at spatial infinity, for defining a relativistic positioning and navigation system, based on the use of four-dimensional bases of null four-vectors, in flat spacetime. As a prototypical case, we show how pulsars can be used to define such a positioning system. The reception of the pulses for a set of different sources whose positions in the sky and periods are assumed to be known allows the determination of the user’s coordinates and spacetime trajectory, in the reference frame where the sources are at rest. We describe our approach in flat Minkowski spacetime, and discuss the validity of this and other approximations we have considered.     

Near real-time estimation of tropospheric water vapour content from ground based GNSS data and its potential contribution to weather now-casting in Austria

The importance of high resolution meteorological analysis of the atmosphere increased over the past years. A detailed analysis of the humidity field is an important precondition for a better monitoring of local and regional extreme precipitation events and for forecasts with improved spatial resolution. For this reason, the Austrian Meteorological Agency (ZAMG) is operating the spatial and temporal high resolution INCA system (Integrated Now-casting through Comprehensive Analysis) since begin of 2005. Errors in this analysis occur mainly in the areas of rapidly changing and hard to predict weather conditions or rugged topography with extreme differences in height such as the alpine area of Austria. The aim of this work is to provide GNSS based measurements of the tropospheric water vapour content with a temporal resolution of 1 h and a temporal delay of less than 1 h to assimilate these estimates into the INCA system. Additional requirement is an accuracy of better than 1 mm of the precipitable water (PW) estimates.     

DORIS processing at the European Space Operations Centre

This paper gives an overview of the DORIS related activities at the Navigation Support Office of the European Space Operations Centre. The DORIS activities were started in 2002 because of the launch of the Envisat satellite where ESOC is responsible for the validation of the Envisat Precise Orbits and a brief overview of the key Envisat activities at ESOC is given. Typical orbit comparison RMS values between the CNES POE (GDR-C) and the ESOC POD solution is 6.5, 18.8 and 23.1 mm in radial-, along- and cross-track direction. In the framework of the generation of the ITRF2008 ESOC participated in the reprocessing of all three space geodetic techniques; DORIS, SLR, and GPS. Here the main results of our DORIS reprocessing, in the framework of the International DORIS Service (IDS), are given. The WRMS of the weekly ESOC solution (esawd03) for the 2004–2009 period compared to the IDS-1 combined solution is of the order of 12 mm. Based on the long time series of homogeneously processed data a closer look is taken at the estimated solar radiation pressure parameters of the different satellites used in this DORIS analysis. The main aim being the stabilization of the Z-component of the geocentre estimates. We conclude that the ESOC participation to the IDS ITRF2008 contribution has been beneficial for both ESOC and the IDS. ESOC has profited significantly from the very open and direct communications and comparisons that took place within the IDS during the reprocessing campaign.